# Building & Office IoT: monitoring, sensors and parking on one network of devices

A modular network of devices for residential buildings and offices: monitoring, sensors, access control and parking on Raspberry Pi, with the data held by the building’s owner. The first community has its monitoring in place; parking and sensors wait for the platform prototype.

## At a glance

- Type: A project developed at Kol.ski
- For whom: Housing communities, property managers and offices; the first is a community in Warsaw, described anonymously
- Scope: Monitoring, sensors, access control, parking and events on one device platform
- Status: Monitoring implemented in a simplified form, platform before the prototype

## Challenge

The existing monitoring did not cover the places residents asked about: staircases, lifts, the bin store and the patio. In the garage, narrow passages and an exit without visibility, so drivers warned each other with mirrors and the horn.

> No subscription, and no recordings handed to an outside party.

The community wanted solutions it could maintain on its own. This is not a classic BMS controlling heating and ventilation: it is about what can be seen, what opens and who drives in.

## Solution

One network of devices instead of separate systems from different vendors: every node is a Raspberry Pi in a role matched to the hardware attached to it, with the data held by the community or the company and expansion staircase by staircase or floor by floor.

### Monitoring

A camera placement plan point by point, with a rationale for each location and field of view. A Wi-Fi mesh network where a cable was not worth it, cameras on Raspberry Pi, door-open sensors on technical doors.

### Parking

A system from scratch on Raspberry Pi: plate readers at the entrance and the exit, a central vehicle database, LEDs guiding to an assigned space, collision warning in narrow passages.

### Devices with a role

A Raspberry Pi 5 handles cameras and processing, a Pi Zero 2 W intermediate nodes, a Pi Pico 2 W simple battery sensors. On first start a device recognises the hardware attached to it, reports its role and receives its configuration; a Pi 5 with a camera, for example, reports as a monitoring node.

### Power without interruptions

Main devices run on mains power with a battery as a UPS, small sensors on replaceable cells that can be swapped without switching off. Battery life will only be known from measurements.

## Result

The contractor implemented the placement from the concept, but with simpler means. For residents the result is the one that mattered: footage from the places the concept pointed to, stored by the community.

| Element | Concept | Implementation | Outcome |
| --- | --- | --- | --- |
| Camera placement | Point by point, with fields of view | Built to the concept | + Implemented |
| Cameras | Raspberry Pi with our own software | Off-the-shelf Reolink cameras | ~ Simplified |
| Connectivity | Wi-Fi mesh network | Ordinary Wi-Fi routers, mostly cabled | ~ Simplified |
| Door sensors | Door-open sensors on technical doors | None | - Not implemented |
| Parking system | Plates, database, LED guidance, warning | None: monitoring came first | - Design only |

The next step is a prototype of the platform:

- Recognising the attached hardware and registering a device on the network with its role.
- Testing the Wi-Fi mesh network and how devices behave when the connection is lost.
- Measuring the power draw of battery sensors and swapping cells without switching off.

## Lessons

- Placement outlives hardware. A contractor will always simplify the technology, so a design has to stand on its layout and fields of view, not on the brand of the devices.
- Off-the-shelf hardware wins on service. Custom software needs someone to maintain it, and a community has no IT department.
- An unbuilt design remains too. Plate recognition, guidance to a space and collision warning return as modules of this platform and in our work on [devices](https://kol.ski/en/rd-devices).
- Standards are born from practice. [OOPIS](https://kol.ski/en/projects/oopis) came from the same community: the need for durable labelling of building elements.

## A similar problem?

We design monitoring, networks and systems for buildings so that they can be maintained without us. Tell us what you want to solve.

[Discuss your project](mailto:hi@kol.ski) · [Book 30 minutes](https://calendar.app.google/CJxZPq3FqabCDMS59) · [Projects](https://kol.ski/en/projects)
